<link rel="stylesheet" href="styles.f3b1fba60ec7970c.css">
Nasarawa State University, KeffiNasarawa State University, KeffiInstitutional Repository

APPLICATION OF STATISTICAL QUALITY CONTROL TECHNIQUES ON VOLUME OF PRODUCTS AT HABILA FOOD AND BEVERAGES COMPANY KANO, NIGERIA.

Loading...
Thumbnail Image

Journal Title

Journal ISSN

Volume Title

Publisher

DEPARTMENT OF STATISTICS FACULTY OF NATURAL AND APPLIED SCIENCES NASARAWA STATE UNIVERSITY, KEFFI

DOI

Abstract

Controlling and improving Quality has become an important business strategy for many organisations, because a business that can delight customers by improving and controlling quality can dominate its competitors. Hence, this project work focused on the application of statistical quality control technique on volume of products at Habila Food and Beverage Company, Kano, Nigeria. The objective of this study is to determine if the production in Habila Food and Beverage Company is under control and capable. To achieve the aim and objectives of this project work, quality control data were collected through the secondary sources (that is directly from the Quality Control Department of the company) from different machine used by the company for can and bottle fillers and the respective statistical parameters such as the Means, Ranges, Standard Deviations, Center Line Control Limit, (CL), Upper Control Limit (UCL) and Lower Control Limit (LCL) were developed and analyzed for the company using statistical approach. The resulting Control Charts was also constructed using the parameters developed for better ix understanding and visibility. From the results, it was found that the Can and Bottle filler volume collated and analyzed using the Mean (X-bar) and R- Charts for Bottle fillers lies within the designed range of specifications, implying that the process is capable of producing acceptable product. However, it was also discovered that two (2) of the Can filler volume collated and analyzed using the Range (R - Chart) were out of control. These are attributed to assignable causes such as lack of personal training, poor mix, mechanical fault, etc, are to be subjected to process monitoring and evaluation so as to better their products.

Description

Keywords

Citation

A DISSERTATION PROJECT SUBMITTED TO THE SCHOOL OF POSTGRADUATE STUDIES, NASARAWA STATE UNVERSITY KEFFI, IN PARTIAL FULFILMENT OF THE REQUIREEMNTS FOR THE AWARD OF DECREE OF MASTERS IN SCIENCE (M.SC) STATISTICS

Endorsement

Review

Supplemented By

Referenced By